Scroll Wall Hanging | Machine Embroidery Designs | Urban Threads - Print

Scroll Wall Hanging

There's something so fun about going big and bold with embroidery. Like with the new Candlelight Tales collection -- each full design is divided up into three pieces to let you maximize the power of your hoop. The question is, how do you show off that big and beautiful embroidery? Well, this wall scroll is a simple and chic way to showcase that big embroidery project you're so proud of!

Supplies


To make your scroll wall hanging, you'll need:

I am using the largest size of the Romeo & Juliet embroidery design from the Candlelight Tales collection. These pieces measure around 8 x 8 inches each, so the finished full design could end up as tall as 24 inches. However, in most cases it will be smaller, as the three-piece sections slightly overlap each other to create the full design. If you are curious about how long each completed design will end up, make sure to check out the product description for each design. This will give an approximate finished length.

Given my design choice, I want the width of my finished scroll to be around 12 inches, so I cut a piece of canvas fabric 14 inches wide, and used the length that the fabric comes in on the bolt (44 inches). This gives me plenty of space to hem my fabric on all sides, and lots of extra inches to play with how much I want to roll or unroll the scroll when I hang it.

Products Used


  • Candlelight Tales - Romeo and Juliet (Split) (Sku: EMP17149-1)

Steps To Complete

The first thing we can do is tea dye the fabric for a vintage look. I also used some old coffee, mixed with some hot water and black tea bags. Black tea tends to dye fabric more brown, while coffee fives a more yellowed dye effect.

Here is the fabric wet, after soaking for 30 minutes or so.

While the fabric is drying, hot glue the wooden balls onto the ends of the dowels.

After the glue dries completely, spray paint your scroll rods any color you like! This step is optional, but it's nice because it covers up any messy hot glue edges that might have happened in the previous step, and makes them look more like metal tapestry rods. I sprayed mine copper-colored.

After your fabric dries, iron it flat. Then find the center of your fabric and mark a line for your 3 pieces of embroidery to line up on.

Using printed templates helps in this process. If you need a refresher on how to print these, click here.